Kyosho 33021 4WD Racing Buggy Readyset INFERNO MP9 TKI4 V2

หากคุณลกค้าสนใจ จะสั่งซื้อ ให้สอบถามสถานะ สินค้าล่าสุด มาทางข้อความ ก่อนกดสั่งในแอปครับ

Take the incredible performance of the MP9 TKI4 straight from the box to the race circuit with this Readyset!
With 8 world championship titles the Inferno has set the standard as the most powerful 1/8 scale engine racing buggy of all time. The DNA of the competition-level MP9 TKI4 model and its advanced racing technology is embodied in this Readyset “MP9 TKI4 V2”. The MP9 TKI4’s signature long front sus arms and 17.5°caster angle front hub carriers realize superior cornering stability and sharp control while the adoption of a forward cabin type body increases downforce using the Inferno’s aerodynamic performance advantage to deliver balanced cornering and optimal traction. Including the user-friendly and high torque KE21SP engine fitted with recoil starter and rear existing exhaust anyone wishing to challenge the peak of 1/8 engine buggy performance can find the perfect racing partner in this MP9 TKI4.


*Rib reinforcement of the TKI4 long type front sus arms adds extra strength and delivers improved steering response surface tracing and cornering performance.
*Dust guards not only prevent mud sticking on the rear suspension arms but also stop grass from catching in the drive shaft and protect the shock shafts.
*Readyset contains a pre-assembled chassis and body including everything except batteries for the transmitter/receiver and engine starting tools. Can be ready for action the same day you buy it.
*Both steering and throttle are equipped with Waterproof high-torque KS5031-09MW servos.
*Precision setting adjustment of wheelbase tread toe angle camber angle caster angle and roll center etc.
*High heat dissipation from the brake disk and large capacity center differential deliver control stability right through to the end of the race.
*Features a large capacity air cleaner that extends the maintenance cycle.
*Wide variety of optional parts provides extensive scope for performance tuning.

■Length　490mm
■Width　307mm
■Height　180mm
■Ground Clearance　28mm
■Wheelbase　325mm (4 settings available by changing rear hub collar position)
■Tread (F/R)　254mm (2 front settings and 3 rear settings available by changing bushes)
■Tire (F/R)　φ116 x 44mm
■Gear Ratio　11.7:1
■Weight　3370g approx.
■Engine　KE21SP (recoil starter installed/rear exhaust)

●Factory assembled chassis installed with R/C system
●Printed pre-cut body complete with coloring
●Pre-installed KE21SP engine with rear exhaust
●Syncro KT-331P transmitter
●1.5 2.0 2.5mm Hexagonal wrench
●Cross wrench (small)
●17mm Wheel wrench

REQUIREMENT TO RUN
●AAA x 8 alkaline batteries for transmitter
●Fuel
●Starting tools (Fuel bottle Plug heater)